Designed And Built For The Street Enthusiast That Believes "Some Is Good, More Is Better, And Too Much Is Just Enough!" This 632 UltraStreet Big Dawg Has Been engineered To Deliver Incredible Race Engine Performance In A Reliable Pump Gas Friendly Package.
- Horsepower
- Torque
- Bore & Stroke
- Compression Ratio
- 900 @ 6200 RPM
- 845 @ 4600 RPM
- 4.600 x 4.750
- 10.75
- Dart Big "M" Tall Deck Block w/Splayed 4 Bolt Main Caps
- Callies 4340 Magnum Plus 4.750" Stroke Steel Crank
- Manley 4340 6.700" H-Beam Steel Rods w/ARP 2000 Bolts
- Clevite 77 "H" Series Main & Rod Bearings
- Ross/SSRE Custom 10.75-1 Forged Aluminum Pistons
- Speed Pro Plasma Moly Ring Set
- SSRE/Comp Cams Custom "Street Roller" Camshaft
- Comp Cams Solid Roller Lifters
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
- Dart Pro 2 380 Fully CNC Ported Aluminum Heads
- 1.640" Manley Nextek Roller Springs
- 10° Titanium Retainers
- ARP Head Studs w/Parallel Ground Washers
- Harland Sharp Wide Body 1.7 Roller Rockers
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Merlin "X" Dominator Aluminum Intake
- SSRE/Moroso Pro Windage Series Oil Pan
- Moroso Race Prepped Oil Pump w/Tig Welded HD Pickup
- GM Performance Chrome Cover w/Billet Timing Pointer
- Hi-Performance Harmonic Balancer
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
|
|
|||
| Carburetors & Fuel System: | |||||
| 1150 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. |
| $ 995 | |||
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator |
|
$ 209 | |||
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump • Greater Than 900HP |
|
$ 399 | |||
| Ignition System: | |||||
| MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8mm Wire Set. Custom Curved and Calibrated To Your Engine. |
| $ 395 | |||
| MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) |
| $ 239 | |||
| MSD Blaster 2 Hi Performance Ignition Coil |
| $ 39 | |||
| Composite Distributor Gear (if required) |
| $ 95 | |||
| Shortblock Components: | |||||
| Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) | |
$ 4000 | |||
| Oliver Steel Billet Rods or Manley Pro Series I-Beam (Your Choice) |
| $ 995 | |||
| Calico Coated Bearing Package | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| ATI Super Damper SFI Harmonic Balancer | |
$ 275 | |||
| Valvetrain Components: | |||||
| Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) | |
$ 250 | |||
| SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts | |
$ 250 | |||
| T&D Pro Series Aluminum Shaft Rocker System | |
$ 1195 | |||
| New Crower Stainless Steel Shaft Rocker Arm System | |
$ 1395 | |||
| Nitrous Package (250+ HP Shot): | |||||
| Hellfire® Rings |
| $ 175 | |||
| Calico Coated Bearing Package | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) | |
$ 250 | |||
| ATI Super Damper SFI Harmonic Balancer | |
$ 275 | |||
|
|||||
| Accessories: | |||||
| SFI Flex Plate w/ARP Bolts (Required At All Racetracks) |
| $ 125 | |||
PowerMaster Hi-Torque Mini Starter |
| $ 229 | |||
| Painless Performance Hot Shot Relay Kit (Recommended for above starter) |
| $ 39 | |||
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) |
| $ 200 | |||
Meziere 55GPH Electric Water Pump |
| $ 375 | |||
| Moroso Vacuum Pump Kit (Installed) | |
$ 895 | |||
SSRE Engraved Sheet Metal Valve Covers w/Breathers |
|
$ 350 | |||
| Custom Powder Coating Packages Available | |
$ Call | |||
 |
|
|
For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience. |
|
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam
•
Crane High Rev Hydraulic Roller Lifters
•
Isky "Enduro Design" Premium Valve Spring Package
|
|
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Additional.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Fri 9:00 a.m. - 6:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2008 All Rights Reserved