Less Carb & Ignition

Designed And Built For The Street Enthusiast That Believes "Some Is Good, More Is Better, And Too Much Is Just Enough!" This 632 UltraStreet Big Dawg Has Been Engineered To Deliver Incredible Race Engine Performance In A Reliable Pump Gas Friendly Package.

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • Fuel Requirement
  • 900 @ 6200 RPM
  • 845 @ 4600 RPM
  • 4.600 x 4.750
  • 10.75 to 1
  • 93 Octane
Continued on Next Page
632 UltraStreet Hi-Performance Crate Engines
Accessories:
Billet Specialties Tru Trac Serpentine System $ Call
Billet Specialties V-Track Pulley System $ Call
SFI Flex Plate w/ARP Bolts (Required At All Racetracks) $ 125
PowerMaster Hi-Torque Mini Starter $ 229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $ 39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) SBC $175 $ 195
Meziere 55GPH Electric Water Pump $ 375
Custom Powder Coating Packages Available $ Call
SSRE Engraved Sheet Metal Valve Covers w/Breathers $ 350
Carburetors & Fuel System:
1150 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. $ 995
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator $ 215
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump • Greater Than 900HP $ 399
Ignition System:
MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8.5mm Wire Set. Custom Curved and Calibrated To Your Engine. $ 395
MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 239
MSD 6AL-2 Progammable Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 279
MSD Blaster 2 Hi Performance Ignition Coil $ 39
Composite Distributor Gear (if required) $ 110
Shortblock Components:
Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) $ 4000
Oliver Steel Billet Rods or Manley Pro Series I-Beam (Your Choice) $ 995
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
ATI Super Damper SFI Harmonic Balancer $ 275
Valvetrain Components:
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts $ 250
T&D Pro Series Aluminum Shaft Rocker System $ 1195
Crower Stainless Steel Shaft Rocker Arm System. Designed For Severe Duty Street Use. $ 1150
Continued on Next Page
632 UltraStreet Hi-Performance Crate Engines
Nitrous Package (250+ HP Shot):
Hellfire® Rings $ 175
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
ATI Super Damper SFI Harmonic Balancer $ 275
Nitrous Package (Includes All Nitrous Options) Total Package Value Of $945 - Save $50 ! $ 895

If This Fuel Is Readily Available In Your Area, Our E85 Version Offers Much Greater HP And Torque Numbers Over Its' Gasoline Equivalent. E85 Fuel's Ability To Operate Without Detonation Under Much Higher Cylinder Pressure Allows Us To Significantly Raise The Compression Ratio And Slightly Alter Cam Timing To Produce These Dramatic Improvements. You Must Run An E85 Specific Carb Or Program Your Aftermarket Fuel Injection To Work With This Engine.

E85 Options: (Specific To This Version - All Other Classic Options Available)
QuickFuel E85 850 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 995

For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience.
Horsepower 875 @ 5700 RPM
Torque ft/lbs 845 @ 4200 RPM
Compression Ratio 10.75 to 1
Fuel Requirement 93 Octane
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam • Crane High Rev Hydraulic Roller Lifters • Isky "Enduro Design" Premium Valve Spring Package
All Classic Options Available
Components Subject To Change Due To Availability.

Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 • Email: ssre123@aol.com
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Fri  9:00 a.m. - 6:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2010 All Rights Reserved