Less Carb & Ignition

If You Want The Biggest And Baddest Low Deck Engine Available To Fit In Your Hot Rod, Our 582 Is The Engine For You! Utilizing A Relatively Mild "Street Roller" Cam Profile And A 10.5 Compression Ratio, It Delivers The Tire Melting Power You Want And The Cruising Reliability You Need In A Pump Gas Friendly Package.

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • 745 @ 6200 RPM
  • 710 @ 4500 RPM
  • 4.600 x 4.375
  • 10.5
Carburetors & Fuel System:
950 CFM Holley 4150 Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted.
(Increased Driveability w/Only Slight HP Loss)		 $ 895
1050 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted. $ 995
Mechanical Fuel Pump Package Includes: High Volume Race Design 6 Valve Pump, Fuel Pump Rod, XRP -8 Braided Fuel Line Inlet Kit w/8AN Lines, Fittings and Fuel Filter. Plumbed, Installed & Dyno Tested On Your Engine. $ 395
Holley Billet Gerotor Electric Fuel Pump • Up To 750HP $ 179
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator $ 209
Ignition System:
MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8mm Wire Set. Custom Curved and Calibrated To Your Engine. $ 395
MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 239
MSD Blaster 2 Hi Performance Ignition Coil $ 39
Composite Distributor Gear (if required) $ 95
Shortblock Components:
Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) $ 4000
Callies USA Made 4340 Dragonslayer Crank w/Dura-Tough Heat Treating $ 795
Eagle 4340 3D Rods w/L19 Rod Bolts $ 125
Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts $ 300
"All American" Callies Crank & Manley Rod Package Total Package Value Of $1095 - Save $100 ! $ 995
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
SFI Harmonic Balancer (Required At All Race Tracks) $ 150
Valvetrain Components:
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts $ 250
Nitrous Package (250+ HP Shot):
Callies USA Made 4340 Dragonslayer Crank w/Dura-Tough Heat Treating $ 795
Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts $ 300
Hellfire® Rings $ 175
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
Nitrous Package (Includes All Nitrous Options) Total Package Value Of $1765 - Save $100 ! $ 1665
Accessories:
SFI Flex Plate w/ARP Bolts (Required At All Racetracks) $ 125
PowerMaster Hi-Torque Mini Starter $ 229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $ 39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) $ 200
Meziere 55GPH Electric Water Pump $ 375
SSRE Engraved Sheet Metal Valve Covers w/Breathers $ 350
Custom Powder Coating Packages Available $ Call

This "Extended Cruising" Version Is Designed For The Person Who Really Enjoys Driving Their Hot Rod On A "Daily" Basis. Works With 2.5" Or Bigger Exhaust, Mild Street Gearing And Virtually Any Converter. This Engine Utilzes A Hydraulic Roller Cam And 9.5 Compression Ratio That Gives You Day To Day "Power Tour" Cruisability, 91 Octane Compatibility, And Plenty Of Horsepower For Those Times When You Want To Just Light Up The Tires! This Engine Package Delivers Over 600 lbs/ft Of Torque From 3200 RPM!!
Horsepower 695 @ 5600 RPM
Torque ft/lbs 700 @ 4400 RPM
Comp Ratio 9.5
JE Custom 9.5-1 Forged Aluminum Pistons • Comp Cams Custom Hydraulic Roller Cam • Comp Cams Hydraulic Roller Lifters • Milodon Street/Strip Oil Pan
EC Options: (Specific To This Version - All Other Classic Options Available)
Edelbrock 825 CFM Carb Package w/Electric Choke includes: Carb Spacer, Studs & Gaskets. Dyno Tuned and Jetted. Excellent Street Manners With Improved Cold Weather Starting & Increased Fuel Economy. Produces Slightly Less Peak Horsepower. $ 595
Chrome Edelbrock Dual Feed line with filter and AN fittings (for Edelbrock carb only). $ 95
Holley NASCAR Style 830 CFM Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned and Jetted. $ 895
Holley 750 CFM Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. This Package has that "Race Car" look with the streetability of a 750 CFM carb! $ 995
Edelbrock Dual Quad Carburetor Setup Complete $ Call
CNC Chamber Upgrade $ 395

For Those That Want Even More Power Than "The Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters. This Version Also Comes Standard w/CNC Ported Combustion Chambers And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience.
Horsepower 765 @ 6000 RPM
Torque ft/lbs 695 @ 4500 RPM
Comp Ratio 10.5
Dart Pro 1 345cc Aluminum Heads w/CNC Ported Chambers • Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam • Crane High Rev Hydraulic Roller Lifters • Isky "Enduro Design" Premium Valve Spring Package
HHR Options: (Specific To This Version - All Other Classic Options Available)
Dart Pro 1 355 Fully CNC Ported Heads w/Merlin X Intake (Adds 25HP) $ 695

The "Saturday Night Special" Package Is Designed For The Hot Rodder That Puts Performance Above All Else. It Combines "Limited" Streetability With "Race Engine" Performance In A Pump Gas Version! This Is The "Bad Boy" Of The Bunch! Putting Out Over 800HP, This Monster Requires Competition Drive Train, Chassis And Exhaust Mods To Deliver Its Maximum Potential. With Its Slightly Higher Compression, More Aggressive Cam And Fully CNC Ported 355cc Dart Pro 1 Aluminum Heads, It Requires A Minimum Of 94 Octane Gas, But That's A Small Price To Pay For The Incredible Performance This Package Delivers.
Horsepower 825 @ 6300 RPM
Torque ft/lbs 720 @ 4800 RPM
Comp Ratio 10.75
Dart Pro 1 Fully CNC Ported 355cc Aluminum Heads • Manley 1.640" NexTek Roller Springs & Titanium Retainers w/10° Locks • Pro Series 1.7 Aluminum Roller Rockers • ARP Competition Head Stud Kit • JE Custom 10.75-1 Forged Aluminum Pistons • Comp Cams Custom Ground Steel Billet Solid Roller Cam designed with more aggressive ramp speed, lift and duration • Stage I Merlin X Dominator Intake Designed for Extreme Performance
SS Options: (Specific To This Version - All Other Classic Options Available)
Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) $ 3800
T&D Pro Series Aluminum Shaft Rocker System $ 1195
New Crower Stainless Steel Shaft Rocker Arm System $ 1395
Moroso Pro Series Windage Oil Pan (adds power and provides better oil control)
Stock Chassis may require modification.		 $ 200
Moroso Vacuum Pump Kit (Installed) $ 895
Jesel Belt Drive $ 995
ATI Super Damper SFI Harmonic Balancer $ 275

Components Subject To Change Due To Availability.

Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Additional.

Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540

35 Davinci Drive • Bohemia, NY 11716

HOURS: Mon - Fri  9:00 a.m. - 6:00 p.m. EST

A Division Of Scott Shafiroff Race Engines & Components © 2000-2008 All Rights Reserved