As Seen On Hot Rod TV! This "Small Block" Engine Delivers 472 Cubic Inches Of "Big Block" Power In A Small Block Package. When You've Got To Have The "Biggest Stick In The Park", This Is Your Only Choice!
- Horsepower
- Torque
- Bore & Stroke
- Compression Ratio
- 635 @ 6000 RPM
- 630 @ 4600 RPM
- 4.200 x 4.250
- 10.5
- Dart Tall Deck Iron Eagle Block w/Splayed 4 Bolt Main Caps
- Callies Pro Series 4340 4.250" Stroke Steel Crank
- Eagle 4340 6.125" H-Beam Steel Rods
- Clevite 77 "H" Series Main & Rod Bearings
- JE Custom 10.5-1 Forged Aluminum Pistons
- Speed Pro Plasma Moly Ring Set
- SSRE/Comp Cams Custom "Street Roller" Camshaft
- Comp Cams Solid Roller Lifters
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
- AFR Eliminator Fully CNC Ported Aluminum Heads
- 1.500" Roller Springs w/Steel Retainers
- Manley Chromemoly Head Bolts & Heat Treated Washers
- Comp Cams 1.6 Pro Magnum Roller Rockers
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Dart "SuperMod" Ported Aluminum Intake
- Moroso Wide Rail Street/Strip Stroker Oil Pan
- Moroso Race Prepped Oil Pump w/Tig Welded HD Pickup
- Polished Aluminum Front Cover w/Billet Timing Pointer
- Hi-Performance Harmonic Balancer
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
|
|
|||
| Carburetors & Fuel System: | |||||
| 950 CFM Holley 4150 Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted. (Increased Driveability w/Only Slight HP Loss) |
|
$ 895 | |||
| 1050 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted. | |
$ 995 | |||
Holley Billet Gerotor Electric Fuel Pump • Up To 750HP |
|
$ 179 | |||
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator |
|
$ 209 | |||
| Ignition System: | |||||
| MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8mm Wire Set. Custom Curved and Calibrated To Your Engine. |
| $ 395 | |||
| MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) |
| $ 239 | |||
| MSD Blaster 2 Hi Performance Ignition Coil |
| $ 39 | |||
| Composite Distributor Gear (if required) |
| $ 95 | |||
| Shortblock Components: | |||||
| Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) | |
$ 4000 | |||
| Eagle 4340 3D Rods w/L19 Rod Bolts | |
$ 125 | |||
| Manley H-Beam 4340 Stroker Rods w/ARP 2000 Bolts | |
$ 300 | |||
| Calico Coated Bearing Package | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| SFI Harmonic Balancer (Required At All Race Tracks) | |
$ 150 | |||
| Valvetrain Components: | |||||
| Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) | |
$ 250 | |||
| SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts | |
$ 200 | |||
| Nitrous Package (250+ HP Shot): | |||||
| Manley H-Beam 4340 Stroker Rods w/ARP 2000 Bolts | |
$ 300 | |||
| Hellfire® Rings |
| $ 175 | |||
| Calico Coated Bearing Package | |
$ 150 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) | |
$ 250 | |||
|
|||||
| Accessories: | |||||
| SFI Flex Plate w/ARP Bolts (Required At All Racetracks) |
| $ 125 | |||
PowerMaster Hi-Torque Mini Starter |
| $ 229 | |||
| Painless Performance Hot Shot Relay Kit (Recommended for above starter) |
| $ 39 | |||
Edelbrock Aluminum "High Volume" Mechanical Water Pump |
| $ 185 | |||
Meziere 55GPH Electric Water Pump |
| $ 375 | |||
| Custom Powder Coating Packages Available | |
$ Call | |||
 |
|
|
This "Extended Cruising" Version Is Designed For The Person Who Really Enjoys Driving Their Hot Rod On A "Daily" Basis. Works Well With 2.5" Or Bigger Exhaust, Mild Street Gearing And Stock Converters. This Engine Utilzes A Hydraulic Roller Cam And 9.5 Compression Ratio That Gives You Day To Day "Power Tour" Cruisability, 91 Octane Compatibility, And Blistering Horsepower!! |
|
Custom JE 9.5-1 Forged Aluminum Pistons • Comp Cams Custom Hydraulic Roller Cam • Comp Cams Hydraulic Roller Lifters |
|
||||||||||||
 |
|
|
For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience. |
|
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam
•
Comp Cams High Rev Hydraulic Roller Lifters
•
Isky "Enduro Design" Premium Valve Spring Package
|
|
 |
 |
|
The "Saturday Night Special" Package Is Designed For The Hot Rodder That Puts Performance Above All Else. It Combines "Limited" Streetability With "Race Engine" Performance In A Pump Gas Version! This Is The "Bad Boy" Of The Bunch! Putting Out Almost 700HP, This Beast Shreds Tires And Leaves The Competition In The Dust! This Version Was Featured On "HorsePower TV And Includes Many "Competition Style" Upgrades. It Requires A Minimum Of 93 Octane Gas, But That's A Small Price To Pay For The Incredible Performance This Version Delivers. |
|
Dart Platinum Pro 1 230cc Fully CNC Ported Aluminum Heads
•
Pro Series 1.6 Aluminum Roller Rockers
•
ARP Competition Head Stud Kit
•
Comp Cams Custom Ground Steel Billet Solid Roller Cam designed with more aggressive ramp speed, lift and duration
•
Dart Dominator Intake w/Stage I "SuperMod" Porting
|
|
|||||||||||||||||||||
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Additional.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Fri 9:00 a.m. - 6:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2008 All Rights Reserved