Less Carb & Ignition

As Seen On Hot Rod TV! This "Small Block" Engine Delivers 472 Cubic Inches Of "Big Block" Power In A Small Block Package. When You've Got To Have The "Biggest Stick In The Park", This Is Your Only Choice!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • Fuel Requirement
  • 635 @ 6000 RPM
  • 630 @ 4600 RPM
  • 4.200 x 4.250
  • 10.5 to 1
  • 92 Octane
Continued on Next Page
472 UltraStreet Hi-Performance Crate Engines
Accessories:
Billet Specialties Tru Trac Serpentine System $ Call
Billet Specialties V-Track Pulley System $ Call
SFI Flex Plate w/ARP Bolts (Required At All Racetracks) $ 125
PowerMaster Hi-Torque Mini Starter $ 229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $ 39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) $ 200
Meziere 55GPH Electric Water Pump $ 375
Custom Powder Coating Packages Available $ Call
Carburetors & Fuel System:
QuickFuel 830 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 765
QuickFuel 950 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 895
1050 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted. $ 995
Holley Billet Gerotor Electric Fuel Pump • Up To 750HP $ 185
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator $ 215
Ignition System:
MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8.5mm Wire Set. Custom Curved and Calibrated To Your Engine. $ 395
MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 239
MSD 6AL-2 Progammable Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 279
MSD Blaster 2 Hi Performance Ignition Coil $ 39
Composite Distributor Gear (if required) $ 110
Shortblock Components:
Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) $ 4000
Eagle 4340 3D Rods w/ARP 2000 Rod Bolts $ 125
Callies Compstar 4340 Rods w/ARP 2000 Bolts $ 200
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
SFI Harmonic Balancer (Required At All Race Tracks) $ 150
Remote Oil Filter Mounting Kit includes: Filter Mount, AN Fittings and -12 Braided Line. $ 250
Valvetrain Components:
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts $ 200
Nitrous Package (250+ HP Shot):
Callies Compstar 4340 Rods w/ARP 2000 Bolts $ 200
Hellfire® Rings $ 175
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
Nitrous Package (Includes All Nitrous Options) Total Package Value Of $970 - Save $75 ! $ 895
Continued on Next Page
472 UltraStreet Hi-Performance Crate Engines

If This Fuel Is Readily Available In Your Area, Our E85 Version Offers Much Greater HP And Torque Numbers Over Its' Gasoline Equivalent. E85 Fuel's Ability To Operate Without Detonation Under Much Higher Cylinder Pressure Allows Us To Significantly Raise The Compression Ratio And Slightly Alter Cam Timing To Produce These Dramatic Improvements. You Must Run An E85 Specific Carb Or Program Your Aftermarket Fuel Injection To Work With This Engine.

E85 Options: (Specific To This Version - All Other Classic Options Available)
QuickFuel E85 850 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 995

This "Extended Cruising" Version Is Designed For The Person Who Really Enjoys Driving Their Hot Rod On A "Daily" Basis. Works Well With 2.5" Or Bigger Exhaust, Mild Street Gearing And Stock Converters. This Engine Utilzes A Hydraulic Roller Cam And 9.5 Compression Ratio That Gives You Day To Day "Power Tour" Cruisability, 91 Octane Compatibility, And Blistering Horsepower!!

Horsepower 600 @ 5500 RPM
Torque ft/lbs 605 @ 4300 RPM
Compression Ratio 9.5 to 1
Fuel Requirement 91 Octane
Custom Ross 9.5-1 Forged Aluminum Pistons • Comp Cams Custom Hydraulic Roller Cam • Comp Cams Hydraulic Roller Lifters
EC Options: (Specific To This Version - All Other Classic Options Available)
Holley NASCAR Style 830 CFM Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned and Jetted. $ 895
Holley 750 CFM Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. This Package has that "Race Car" look with the streetability of a 750 CFM carb! $ 995

For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience.

Horsepower 625 @ 5800 RPM
Torque ft/lbs 630 @ 4400 RPM
Compression Ratio 10.5 to 1
Fuel Requirement 92 Octane
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam • Comp Cams High Rev Hydraulic Roller Lifters • Isky "Enduro Design" Premium Valve Spring Package
All Classic Options Available

Continued on Next Page
472 UltraStreet Hi-Performance Crate Engines

The "Saturday Night Special" Package Is Designed For The Hot Rodder That Puts Performance Above All Else. It Combines "Limited" Streetability With "Race Engine" Performance In A Pump Gas Version! This Is The "Bad Boy" Of The Bunch! Putting Out Almost 700HP, This Beast Shreds Tires And Leaves The Competition In The Dust! This Version Was Featured On "HorsePower TV And Includes Many "Competition Style" Upgrades. It Requires A Minimum Of 93 Octane Gas, But That's A Small Price To Pay For The Incredible Performance This Version Delivers.

Horsepower 675 @ 6200 RPM
Torque ft/lbs 640 @ 4800 RPM
Compression Ratio 10.75 to 1
Fuel Requirement 93 Octane
New Design AFR 227cc CNC Ported Aluminum Heads w/8MM Lightweight Valves • Pro Series 1.6 .050" Offset Aluminum Roller Rockers • ARP Competition Head Stud Kit • Comp Cams Custom Ground Steel Billet Solid Roller Cam designed with more aggressive ramp speed, lift and duration • Dart Dominator Intake w/Stage I "SuperMod" Porting
SS Options: (Specific To This Version - All Other Classic Options Available)
T&D Pro Series Aluminum Shaft Rocker System $ 1195
Moroso Pro Series Windage Oil Pan (adds power and provides better oil control)
Stock Chassis may require modification.
$ 200
Moroso Vacuum Pump Kit (Installed) $ 895
Jesel Belt Drive For Raised Cam Blocks $ 1475
ATI Super Damper SFI Harmonic Balancer $ 275