Ultrastreet High Performance Street Engines
Dart Big M Rebate
Less Carb & Ignition

454 - Isn't That A Big Block? We Build Our 454 Small Block The Right Way ... 9.325" Race Block With Only A 4.185" Bore And A 4.125" Stroke Crank For Extra Torque. No Head Gasket Problems And No Cylinder Wall Issues In This Baby!!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • Fuel Requirement
  • 615 @ 6000 RPM
  • 615 @ 4600 RPM
  • 4.185 x 4.125
  • 10.5 to 1
  • 92 Octane


Accessories:
Billet Specialties Tru Trac Serpentine System $ Call
Billet Specialties V-Track Pulley System $ Call
SFI Flex Plate w/ARP Bolts (Required At All Racetracks) $ 125
PowerMaster Hi-Torque Mini Starter $ 229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $ 39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) SBC $175 $ 195
Meziere 55GPH Electric Water Pump $ 375
Custom Powder Coating Packages Available $ Call
Carburetors & Fuel System:
QuickFuel 830 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 765
QuickFuel 950 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 895
1050 CFM Holley Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned & Jetted. $ 995
Holley Billet Gerotor Electric Fuel Pump • Up To 750HP $ 185
Holley Billet Gerotor Electric Fuel Pump • Up To 900HP • Includes Regulator $ 215
Ignition System:
MSD Electronic Ignition Package Includes: MSD Pro Billet Distributor, Hi Perf Gear, Custom MSD 8.5mm Wire Set. Custom Curved and Calibrated To Your Engine. $ 395
MSD 6AL Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 239
MSD 6AL-2 Digital Electronic Ignition Box (Direct Plug-In For Our MSD Distributors) $ 279
MSD Blaster 3 Hi Performance Ignition Coil w/HEI Style Post $ 49
Composite Distributor Gear (if required) $ 110
Shortblock Components:
Brodix/Dart Aluminum Block w/Special Aluminum Block Head Stud Kit (Slightly Less Peak HP) $ 4000
Eagle 4340 3D Rods w/ARP 2000 Rod Bolts $ 125
Oliver Steel Billet Rods $ 995
Calico Coated Bearing Package $ 150
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
SFI Harmonic Balancer (Required At All Race Tracks) $ 150
Remote Oil Filter Mounting Kit includes: Filter Mount, AN Fittings and -12 Braided Line. $ 250
Valvetrain Components:
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts $ 200
Nitrous Options (250+ HP Shot):
Eagle 4340 3D Rods w/L19 Rod Bolts $ 125
Hellfire® Rings $ 175
Calico Coated Bearing Package $ 150
Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Extended Lifter Life) $ 250
Cometic MLS (Multi Layered Steel) Head Gaskets $ 95
Nitrous Package (Includes All Nitrous Options) Total Value Of $795 - Save $50 ! $ 745

If This Fuel Is Readily Available In Your Area, Our E85 Version Offers Much Greater HP And Torque Numbers Over Its' Gasoline Equivalent. E85 Fuel's Ability To Operate Without Detonation Under Much Higher Cylinder Pressure Allows Us To Significantly Raise The Compression Ratio And Slightly Alter Cam Timing To Produce These Dramatic Improvements. You Must Run An E85 Specific Carb Or Program Your Aftermarket Fuel Injection To Work With This Engine.

E85 Options: (Specific To This Version - All Other Classic Options Available)
QuickFuel E85 850 CFM Mechanical Secondary Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Electric Choke, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. $ 995

This "Extended Cruising" Version Is Designed For The Person Who Really Enjoys Driving Their Hot Rod On A "Daily" Basis. Works Well With 2.5" Or Bigger Exhaust, Mild Street Gearing And Stock Converters. This Engine Utilzes A Hydraulic Roller Cam And 9.5 Compression Ratio That Gives You Day To Day "Power Tour" Cruisability, 91 Octane Compatibility, And Blistering Horsepower!!

Horsepower 580 @ 5500 RPM
Torque ft/lbs 590 @ 4300 RPM
Compression Ratio 9.5 to 1
Fuel Requirement 91 Octane
Custom Ross 9.5-1 Forged Aluminum Pistons • Comp Cams Custom Hydraulic Roller Cam • Comp Cams Hydraulic Roller Lifters
EC Options: (Specific To This Version - All Other Classic Options Available)
Holley NASCAR Style 830 CFM Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned and Jetted. $ 895
Holley 750 CFM Dominator Carb Package includes: Carb, Spacer, AN Inlets, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. This Package has that "Race Car" look with the streetability of a 750 CFM carb! $ 995

For Those That Want Virually All The Power Of "The Big Dawg Classic" Without The Hassle Of Ever Having To Adjust Valves, The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience.

Horsepower 605 @ 5800 RPM
Torque ft/lbs 615 @ 4400 RPM
Compression Ratio 10.5 to 1
Fuel Requirement 92 Octane
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam • Comp Cams High Rev Hydraulic Roller Lifters • Isky "Enduro Design" Premium Valve Spring Package
All Classic Options Available

The "Saturday Night Special" Package Is Designed For The Hot Rodder That Puts Performance Above All Else. It Combines "Limited" Streetability With "Race Engine" Performance In A Pump Gas Version! This Is The "Bad Boy" Of The Bunch! Putting Out Over 650HP, This Beast Shreds Tires And Leaves The Competition In The Dust! This Version Was Featured On "HorsePower TV And Includes Many "Competition Style" Upgrades. It Requires A Minimum Of 93 Octane Gas, But That's A Small Price To Pay For The Incredible Performance This Version Delivers.

Horsepower 655 @ 6200 RPM
Torque ft/lbs 625 @ 4800 RPM
Compression Ratio 10.75 to 1
Fuel Requirement 93 Octane
New Design AFR 227 Fully CNC Ported Aluminum Heads w/8MM Lightweight Valves • Pro Series 1.6 .050" Offset Aluminum Roller Rockers • ARP Competition Head Stud Kit • Comp Cams Custom Ground Steel Billet Solid Roller Cam designed with more aggressive ramp speed, lift and duration • Dart Dominator Intake w/Stage I "SuperMod" Porting
SS Options: (Specific To This Version - All Other Classic Options Available)
T&D Pro Series Aluminum Shaft Rocker System $ 1195
Moroso Pro Series Windage Oil Pan (adds power and provides better oil control)
Stock Chassis may require modification.
$ 200
Moroso Vacuum Pump Kit (Installed) $ 895
Jesel Belt Drive For Raised Cam Blocks $ 1475
ATI Super Damper SFI Harmonic Balancer $ 275