 |
|
 |
Finally A True Drop In Turnkey Fuel Injection Engine That Doesn't Require A Laptop Or A Degree In Rocket Science To Reap The Benefits Of A Proprly Designed And Tuned Fuel Injected System!
- Horsepower
- Torque
- Bore & Stroke
- Compression Ratio
- Fuel Requirement
- 495 @ 5700 RPM
- 515 @ 4500 RPM
- 4.125 x 3.750
- 10 to 1
- 91 Octane
- Dart SHP Block w/Splayed 4 Bolt Main Caps
- Eagle Forged Steel 3.750" Stroker Crank
- Eagle 4340 6.000" Forged Steel H-Beam Rods
- Clevite 77 "H" Series Main & Rod Bearings
- Mahle Custom Coated 9.5-1 Forged Aluminum Pistons
- Plasma Moly Ring Set
- SSRE/Comp Cams Custom Grind Hydraulic Roller Camshaft
- Hgh Performance Hydraulic Roller Lifters
- Billet True Roller Timing Set w/Torrington Bearing
- Dart SHP 200cc Angle Plug Aluminum Heads
- 2.020"/1.600" Stainless Steel Valves
- 1.470" Hydraulic Roller Springs w/Steel Retainers
- Manley Chromemoly Head Bolts & Heat Treated Washers
- Comp Cams Ultra Pro Magnum Roller Rockers
- Chromemoly (1) Piece .080" Wall Pushrods
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Edelbrock "Performer RPM" Aluminum Intake
- Milodon Street/Strip Oil Pan w/Passenger Side Dipstick
- Milodon Race Prepped Oil Pump
- GM Performance Chrome Front Cover w/Billet Timing Pointer
- Degreed Hi-Performance Harmonic Balancer
- Fully Mapped & Calibrated EZ-EFI Fuel Injection
- Custom Calibrated EFI Compatible MSD Distributor
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
 |
|
 |
|
|
| Accessories: | ||
Billet Specialties Tru Trac Serpentine System |
|
$ Call |
Billet Specialties V-Track Pulley System |
|
$ Call |
| SFI Flex Plate w/ARP Bolts (Required At All Racetracks) | |
$ 125 |
JW "The Wheel" Severe Duty SFI Flex Plate |
|
$ 200 |
PowerMaster Hi-Torque Mini Starter |
|
$ 229 |
| Painless Performance Hot Shot Relay Kit (Recommended for above starter) | |
$ 39 |
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version) |
SBC $175 • | BBC $ 195 |
Meziere 55GPH Electric Water Pump |
|
$ 375 |
| Polished Cast Aluminum Front Cover | |
$ 50 |
| Custom Powder Coating Packages Available | |
$ Call |
| EnduraShine Intake Finish w/ARP Stainless Steel Hardware | |
$ 195 |
| Fuel System: | ||
EZ-EFI Fuel Pump Kit Includes: Inline Electric EFI Fuel Pump, 600 HP Adjustable Fuel Pressure Regulator, Fuel Pressure Gauge, Billet Fuel Filter (Re-usable), Relay Harness (Plug & Play for EZ-EFI), (1) 6AN to 6AN Female Coupler (Filter to Fuel Pump), (2) 6AN to O-Ring 6AN Straight Fitting (Regular In/Out). Price includes labor to set required fuel pressure. |
|
$ 365 |
| EZ-EFI Fuel Line Kit Includes: 25 Feet of Push Lock #6 Hose, (3) 6AN Push On Straight Fittings (Black), (2) 6AN Push On 90 ° Fittings (Black), (3) Gator 1/2" Clamps. |
|
$ 149 |
| Ignition System: | ||
| MSD 6AL Digital Electronic Ignition Box w/Hi-Speed Rev Limiter | |
$ 239 |
| MSD 6AL-2 Digital Electronic Ignition Box w/Launch Control & Hi-Speed Rev Limiter | |
$ 279 |
| MSD Blaster 3 Hi Performance Ignition Coil w/HEI Style Post | |
$ 49 |
 |
 |
|
You Asked For It And We Listened! We Struck A Deal With AFR To Get Some Of The Hottest Cylinder Heads On The Market And When Combined With Our Special "Proprietary Grind" Hot Hydraulic Roller Cam, "Ultra Hi-Rev" Hydraulic Roller Lifters and 1.6 Ratio Pro Magnum Rockers, The Power Is Up Over 40HP! |
|
AFR 210 Eliminator Fully CNC Ported Aluminum Heads Featuring 8MM Valves And 1.550" Hydraulic Roller Springs
•
Edelbrock Performer RPM Air Gap Intake
•
Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam
•
High Rev Hydraulic Roller Lifters
|
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 • Email: ssre123@aol.com
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Thu 9:00 a.m. - 6:00 p.m. Friday 9:00 a.m. - 3:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2011 All Rights Reserved